Heating system maintenance · Mill Hill

Heating system maintenance in Mill Hill: looking after loft tanks and exposed pipes before the cold arrives

The parts of a heating system most often forgotten are those in the loft. An older system may have a small feed tank, a cold water tank and lengths of pipe running along the eaves. These parts are cold, hard to see and seldom visited. A failed float valve, a split lagging jacket or a loose lid can cause trouble in winter. Households in Mill Hill can include the loft in a maintenance visit.

Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.

Gas Safe Register WaterSafe Heat Go G3 certified Heat Go Heating and Plumbing Engineer

Many Mill Hill houses have lofts big enough to hold tanks, pipes and a cylinder, with a hatch on the landing. The tank lids may be loose, the lagging worn and the pipes in places bare. Water in a tank can grow stale, and a float valve left unchecked can stick, causing an overflow. Cold air through the roof eaves adds to the risk of freezing.

A loft check takes in five things. The tank lid is secure and the tank is clean. The float valve moves freely and shuts off the water at the right level. The overflow pipe is clear and not dripping. The lagging on pipes and tanks is intact, with no bare patches. And nothing is stacked against pipes or blocking air flow. A torch and a few minutes in good weather are enough to make a note for the engineer.

Heat Go can help you set out a loft check. Tell us what the loft holds and how it is reached, and a short list of things to look at can be drawn up.

Checking the loft before winter in a Mill Hill house

Loft maintenance in different Mill Hill homes

Houses with two tanks in the loft

Both need checking. Ask whether one can be removed in a future system change.

Houses with a boarded loft

Boards hide pipes. Lift a panel to look at the pipes beneath, and ask about extra lagging.

Houses with an old cylinder jacket

A worn jacket loses heat. Ask whether a new one or a modern cylinder is a better choice.

SettingParking and van accessProperty accessTypical enquiries
Houses with two tanks in the loftDrives commonLoft hatchTank checks
Houses with a boarded loftRoadsideLandingHidden pipes
Houses with an old cylinder jacketPermit zonesAiring cupboardCylinder jackets

Tell the engineer how the loft is reached and show the tank positions. Clear a path to the hatch before the visit.

A household climbs into the loft with a torch before the engineer arrives. They find a torn lagging jacket on the tank, a lid out of place and a float valve that is stiff. The engineer replaces the lagging, resets the lid and frees the valve, then checks the overflow pipe. A month later the first frost passes, and the loft stays dry. The household also writes down the position of the stopcock and the drain-down valve on a card pinned inside the hatch, so that whoever is at home can stop the flow quickly if a pipe ever splits. The torn jacket is replaced with a thicker one, and the engineer suggests that boards over pipes be lifted in autumn each year to look beneath them, which the household agrees to do. They also photograph the loft after the visit, with the tank, the pipes and the hatch all in view, and keep the picture with the boiler record, to compare with next autumn’s look.

Loft work is easier in dry weather when the roof space is dry and the light is good. A September visit lets repairs be done before the cold arrives.

Good to know in Mill Hill

Float valve

A valve in a tank that closes as the water level rises, controlled by a floating ball.

Overflow pipe

A pipe that carries away excess water if the float valve fails.

Lagging jacket

A thick insulating cover fitted round a tank or cylinder.

Questions about heating system maintenance in Mill Hill

01Why check the loft?

Tanks and pipes there are cold and easily forgotten.

02What does a float valve do?

It shuts off the water when the tank is full.

03Should the tank have a lid?

Yes, to keep out dirt and insects.

04Is lagging important?

Yes, for tanks and pipes against frost.

05Can I look myself?

Yes, with care. Use a torch and avoid stepping off the joists.

Talk to Heat Go

Ask about heating system maintenance in Mill Hill.

Tell Heat Go what your loft holds, naming your Mill Hill road, and a list of things to check can be drawn up.

The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.

Heating system maintenance enquiry

What can we help with?

All fields marked * are required

We reply to the contact details you give. A UK number such as 07700 900123 works fine.