Listed houses
Consent is needed for many changes, and historic fabric must be protected.
Heat pumps · Highgate
Large period houses are the hardest and the most rewarding candidates for a heat pump, and the owners are usually patient people who care about the building. They lose a great deal of heat through solid walls and tall windows, yet they have the space for cylinders and units. Heat Go answers Highgate heat pump enquiries by treating the fabric of the house as the first question and the protection of the building as the second.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
The Underground station at Highgate dates from January 1941, and the hill above it is covered with substantial nineteenth- and early twentieth-century houses. Many have solid brick walls, high ceilings and large windows, and a cellar, a loft and several outbuildings where pipes and tanks could go. Conservation areas cover much of the district and some houses are listed, so the council must agree changes to the outside and sometimes the inside.
The route to a heat pump in such a house usually starts with improving what can be improved without harming the building, and with accepting that the process will take longer than in a modern home: roof insulation, floors, draught-proofing and secondary glazing. Then the radiators are reviewed, since tall rooms may need large emitters at lower water temperatures. The cylinder and unit are placed with care, often at the back and away from trees, and the council is consulted early. A conservation officer will often give an informal view from a sketch, and that view can save months of redesign.
Heat Go can go through fitting, servicing and repairing heat pumps, with assessment and controls alongside. Describe the house, its status, the walls, windows and heating, and the trees and boundaries around it, and the reply will start with the fabric and the permissions.
Consent is needed for many changes, and historic fabric must be protected.
Heat loss is high, so fabric improvements come first.
Shared structures and several owners complicate decisions.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Listed houses | Drives common | Garden | Consent. |
| Houses with solid walls | Roadside | Loft | Fabric. |
| Converted flats | Permit zones | Common hall | Agreement. |
Highgate Village is the usual meeting point. For the assessment, have the loft hatch, cellar, boiler, radiators and garden ready to show.
The owners of a large house in a conservation area want to replace an old boiler with a heat pump. They confirm the house is not listed, measure the loft, photograph the cast iron radiators and draw the garden. They ask the council about external units. The council replies that a rear position is likely to be acceptable. They pass it all to Heat Go and ask which checks an assessment would make.
Councils answer slowly, so ask about permissions in early spring. Owners of period houses often find the process rewarding, because it makes them look carefully at the building, notice what is original and decide what is worth keeping. Large houses also take longer to assess than flats, because each room needs its own calculation, and owners who gather plans, photographs and utility bills beforehand help the assessor work faster.
Both inside and outside changes can need approval, so ask the council early, and keep any email as a record of what was said.
They can work with a heat pump if sized and balanced correctly. An assessment judges each room, and cast iron holds a good deal of water, which can suit steady, gentle heat.
Roots and falling leaves affect where a unit can stand. Keep a clear space for airflow.
In some cases, once consent and careful design are in place.
Often, if they are sound and sized properly. An assessment checks each one, and can say which to keep, which to flush and which to replace with a larger model of a similar style.
At the back, clear of roots and leaves, with room for airflow.
Usually, since the walls and windows lose heat, and a lighter load lets the heat pump be smaller, quieter and easier to place away from the front of the house.
Weeks. Ask early.
Talk to Heat Go
Give the status of the house, the walls and windows and your road in Highgate.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All heat pumps servicesEvery service in Highgate