Pipework installation & replacement · Highgate

Pipework replacement in Highgate: leaving inspection hatches and a drawing so the new pipes can be reached in a large period house

New pipes laid in a big old house may be hidden for a generation, and the people who need to reach them in future will not know where they lie. A drawing and a few well-placed hatches turn the new work from a puzzle into a plan. A household that asks for them at the outset spares itself and later owners much trouble. Households in Highgate, with large houses and long pipe runs, will benefit most.

Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.

Gas Safe Register WaterSafe Heat Go G3 certified Heat Go Heating and Plumbing Engineer

Houses in Highgate often have long pipe runs between floors, behind panelling and under fine floors. New copper or plastic pipes may follow the old routes or take new ones, and joints are the likeliest points of future trouble. Joints and valves deserve hatches.

For pipework replacement in Highgate, the plan has six parts. Before work, agree the route of the new pipes and mark it on a drawing. Agree where joints, valves and manifolds will lie, and which will be reachable by hatch or lift-out board. Ask for hatches to be neat, labelled and sized for a hand and spanner. Ask for no joints to be buried in walls or under solid floors unless unavoidable. After the work, ask for an as-built drawing showing the final route, with dimensions from fixed points and photographs before the pipes were covered. Fix a copy to the airing cupboard door and keep another with the house papers.

Heat Go can support you as you set it out. Describe the house, and a short list of access and drawing requests for the plumber can be written.

Asking for access hatches and a drawing after pipework replacement in a Highgate house

Hatch and drawing questions in different Highgate homes

Highgate houses with panelled walls

Hatches must be discreet. Ask for a panel that lifts out.

Highgate houses with long runs between floors

Joints are many. Ask for a drawing of each.

Highgate houses with fine floors

Lifting boards risks damage. Ask for marked lift-out boards at joints.

SettingParking and van accessProperty accessTypical enquiries
Highgate houses with panelled wallsRoadsideStudyPanelling
Highgate houses with long runs between floorsDrives commonStairwellLong runs
Highgate houses with fine floorsPermit zonesLandingMarked boards

Give the plumber the drawing request in writing and ask him to photograph the pipes before they are covered.

A household in a large Edwardian house is having the heating and hot water pipes replaced. They ask the plumber for hatches at each joint and valve, and for a drawing. He agrees, fits six neat hatches in the panelling and floors, and sketches the final route with dimensions. He photographs each run before the boards go down and prints the sketch. The household pins a copy in the airing cupboard and files the photographs and the drawing together. Years later a small leak is traced and mended in minutes because the drawing shows the hatch. When a new owner later asks about the pipes, the household hands over the drawing, the pictures and the plumber’s letter, and the owner’s surveyor reads them in ten minutes. The hatches, each labelled with a small brass tag, save him from cutting into the panelling. The household also asks the plumber to leave spare lengths of lagging and a few spare brass tags in the airing cupboard, with a note saying where each belongs, so that a later repair can be finished neatly without a trip to the shop.

Planning access before work starts is easy in any season, and autumn or spring work leaves the house open to dry and air.

Good to know in Highgate

As-built drawing

A drawing showing a system as it was actually installed, not as first planned.

Manifold

A fitting that splits a pipe into several branches, often with a valve on each.

Lift-out board

A floorboard fixed so it can be removed easily to reach pipes below.

Questions about pipework installation & replacement in Highgate

01In Highgate, why ask for hatches?

So joints and valves can be reached without damage.

02In Highgate, what is an as-built drawing?

A drawing of the pipes as installed.

03In Highgate, should joints be buried?

Not unless unavoidable.

04In Highgate, where do I keep the drawing?

In the airing cupboard and with the house papers.

05If gas is smelt during pipework replacement in Highgate, who is rung first?

On Highgate premises, go outdoors immediately, pipework replacement can wait; ring 0800 111 999 first, Highgate switches and flames stay off limits.

Talk to Heat Go

Ask about pipework installation & replacement in Highgate.

Describe the house at Highgate to Heat Go, and a list of access and drawing requests for the plumber can be written.

The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.

Pipework installation & replacement enquiry

What can we help with?

All fields marked * are required

We reply to the contact details you give. A UK number such as 07700 900123 works fine.