Plumbing installations · Highgate

Plumbing installations in Highgate: an island sink in a large kitchen and how its waste is vented and laid to a fall under the floor

An island with a sink looks wonderful and is awkward to plumb. The waste has to cross open floor to reach the stack, with a fall all the way, and air has to be admitted behind it so that the sink does not gurgle. A household that settles the route before the floor is laid, usually with the plumber and kitchen fitter together, avoids a waste that blocks or a sink that smells. Households in Highgate, with large period kitchens, often want one.

Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.

Gas Safe Register WaterSafe Heat Go G3 certified Heat Go Heating and Plumbing Engineer

Houses in Highgate often have a kitchen at the back with a solid or suspended floor and a drain that lies on one wall. An island several metres away means a long waste run. In a timber floor the pipe lies between joists, and in a solid floor it must be sunk or the island raised.

For plumbing installations in Highgate, the plan has six parts. Fix the island’s position and the sink’s place in it. Measure from the sink to the nearest stack or drain, and put it to the plumber how the waste will fall over that run, with the fall marked on a drawing. Decide where the vent goes: an air admittance valve in a cupboard on the island, if the rules allow, or a pipe to the outside. Ask how supply pipes will reach the island, beneath the floor or in a duct, and where the isolation valves will sit behind a hatch. Ask what protects the floor from leaks, such as a tray under the cupboard. And plan the electrics for the dishwasher and any waste disposer with the electrician. Keep the drawing and the vent details.

For plumbing installations in Highgate, let Heat Go help you plan. Say what the kitchen and island are like, and questions for the plumber and fitter about the sink can be written.

Planning the waste and vent for an island sink in a Highgate kitchen

Island sink questions in different Highgate homes

Highgate houses with a solid kitchen floor (plumbing installations)

The waste must be sunk or the island raised. Ask how the fall is achieved.

Highgate houses with a suspended timber floor

The pipe lies between joists. Ask whether any joist needs notching.

Highgate houses where the island is far from the wall

For plumbing installations in Highgate, the waste is long. Ask about venting and an access point.

SettingParking and van accessProperty accessTypical enquiries
Highgate houses with a solid kitchen floor (plumbing installations)RoadsideKitchenSolid floors
Highgate houses with a suspended timber floorDrives commonKitchen extensionTimber floors
Highgate houses where the island is far from the wallPermit zonesGarden roomLong runs

Give the plumber and the kitchen fitter the layout, and ask them to agree the waste route and the vent together.

A household in a large house plans a kitchen with an island sink three metres from the back wall. The plumber and the fitter meet and agree that the floor is timber, so the waste can run between joists with a gentle fall to the stack. They plan an air admittance valve in the sink cupboard, accessible through the cupboard door, and a tray beneath it. The cold and hot supplies run in a duct under the island with a hatch to the isolation valves. The plumber marks the fall on a drawing, and the household checks it against the floor level before the units are fixed. The drawing and the vent details go in the folder.

A kitchen with an island is easiest to plumb before the floor is finished, so planning in early autumn leaves a clear run before winter.

Good to know in Highgate

Air admittance valve

A one-way valve that lets air into a waste pipe to stop it siphoning, while stopping smells escaping.

Waste run

The length of pipe that carries used water from a fitting to a drain.

Tray

A shallow waterproof pan placed under a cupboard to catch leaks.

Questions about plumbing installations in Highgate

01In Highgate, why does an island sink need a vent?

So air can enter and the water drains without gurgling.

02In Highgate, how is the fall achieved?

By laying the pipe on a slope between joists or sinking it into a solid floor.

03In Highgate, where do the isolation valves go?

In the island cupboard, with a hatch.

04In Highgate, is a tray worthwhile?

Yes. It catches small leaks.

05What do Highgate residents do about gas smelt during plumbing installations?

Anyone in Highgate smelling gas should leave, pause plumbing installations in Highgate: 0800 111 999 comes first, Highgate switches and flames are left alone.

Talk to Heat Go

Ask about plumbing installations in Highgate.

Heat Go will set out sink-and-island queries for your plumber and fitter once you describe the Highgate kitchen.

The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.

Plumbing installations enquiry

What can we help with?

All fields marked * are required

We reply to the contact details you give. A UK number such as 07700 900123 works fine.