Heat pump repairs · Highgate

Heat pump repairs in Highgate: knocking in the pipes after the system was installed and what may be behind it

Knocking, ticking or banging in the pipes is an alarming sound, but it often has a simple cause. Pipes expand and contract as the water temperature changes, and a heat pump changes that pattern compared with a boiler. Loose clips, trapped air or a pump speed that is too high can also be to blame. Households in Highgate can listen carefully and note when and where the sound occurs.

Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.

Gas Safe Register WaterSafe Heat Go G3 certified Heat Go Heating and Plumbing Engineer

Larger houses in Highgate have long pipe runs through floors, walls and lofts, many of them hidden. After a heat pump is fitted, the water runs cooler and for longer, and the pipes move differently. Old clips that held pipes snugly for decades may no longer do so, and a pipe in a joist notch can tick as it moves.

Five notes help. Say where the sound seems to come from, such as a certain room, floor or the airing cupboard. Note when it happens: at start-up, as the temperature rises, as it falls or all the time. Note whether it follows the circulation pump’s speed or a change in the schedule. Note whether the radiators are also gurgling, which can suggest air. And note any recent work on the pipes or the floor above. Do not hit the pipes or loosen anything. The engineer can find loose clips, bleed air, adjust the pump speed or add padding where pipes touch timber. A short recording on a phone can help.

A sound diary for the engineer can be set out by Heat Go if you list which rooms hear the knocking and when.

Describing pipe knocking after a heat pump installation in a Highgate house

Pipe knocking questions in Highgate houses

Highgate houses with pipes in joist notches

Pipes tick as they move. Ask the engineer to pad where they touch timber.

Highgate houses with a pump speed set high

Fast flow can make noise. Ask for the speed to be reviewed.

Highgate houses with radiators that gurgle

Air may be trapped. Ask for the system to be bled and balanced.

SettingParking and van accessProperty accessTypical enquiries
Highgate houses with pipes in joist notchesRoadsideLandingNotched joists
Highgate houses with a pump speed set highDrives commonAiring cupboardFast pumps
Highgate houses with radiators that gurglePermit zonesBedroomTrapped air

Tell the engineer where and when the sound occurs and show him the recording. Tell him about any floor or pipe work since installation.

A Highgate household hears a knocking in the landing floor each morning when the heating starts. They note the time, the place and that the sound fades after twenty minutes. They record a clip on a phone and send it to the engineer. He finds a pipe resting hard on a joist notch and padding missing from a clip. He adds padding and refixes the clip, and reduces the pump speed a little. The knocking ceases, and the sound diary shows no entries for a fortnight. The household files the diary and the engineer’s note. The household also asks the engineer whether the old clips could be replaced with ones lined with rubber in other places, and he fits a few more while he is there. A month later, they find the sound diary still empty, and they mark the date of the last entry. The recording on the phone stays in the folder, as a record of what the sound was like before the repair.

Knocking often appears in the first heating season, as pipes settle and the pattern of heat changes. A note in October or November means a visit while the system is still bedding in. Cold mornings make the sounds more noticeable. Pipes settle in the first heating season, so knocking is most common in the first autumn. A report in October or November leads to a visit while the system is still bedding in. Noise is easier to hear in the quiet of the early morning and late evening.

Good to know in Highgate

Thermal expansion

The growth in length of a pipe as it warms, which can cause ticking or knocking.

Pipe clip

A small fixing that holds a pipe to a wall, joist or floor.

Bleeding

Releasing trapped air from a heating system through a small valve.

Questions about heat pump repairs in Highgate

01In Highgate, why do pipes knock?

Expansion, loose clips, air or fast flow may be the cause.

02In Highgate, is it dangerous?

Usually not, but ask the engineer to look.

03In Highgate, can I stop it myself?

Leave pipes alone and note where it occurs.

04In Highgate, will it get worse?

It may if left, so report it early.

05How does Highgate heat pump repairs handle a gas smell?

Dial 0800 111 999 first, meanwhile Highgate heat pump repairs must wait, and Highgate heat pump repairs carries on later.

Talk to Heat Go

Ask about heat pump repairs in Highgate.

Tell Heat Go which rooms hear the knocking and at what hours, and a sound diary will be set out.

The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.

Heat pump repairs enquiry

What can we help with?

All fields marked * are required

We reply to the contact details you give. A UK number such as 07700 900123 works fine.