Radiator installation & repairs · Highgate

Radiator installation and repairs in Highgate: hanging a heavy radiator on an old plaster wall and making the fixings secure

A radiator full of water is heavy, and a large one is very heavy. On an old lath-and-plaster or crumbling brick wall, ordinary brackets may pull out. A household that asks how the wall will be made to carry the load avoids a radiator that sags or comes away. Households in Highgate, with old walls and large radiators, will want a good answer.

Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.

Gas Safe Register WaterSafe Heat Go G3 certified Heat Go Heating and Plumbing Engineer

Houses in Highgate have walls of solid brick, lath and plaster or panelling, some of them centuries old. A cast iron radiator can weigh over a hundred kilograms when full. The fixings need a solid base: a stud, a brick course or a floor-standing foot.

For radiator repairs in Highgate, the questions are six. What is the wall made of and how will the installer find out? What is the radiator’s full weight, and what fixings will carry it? Will it hang on brackets, stand on feet or both? If the wall is lath and plaster, where will the fixings go, into studs or through to a batten? How will the pipes join without strain, and how will the pipe holes be made good? And how will the radiator be levelled and the valves aligned? Ask the installer to show the fixings and the load rating. Ask for a test, with the radiator full, to see that it holds for an hour. Keep the specification of the brackets.

Heat Go will go through the questions with you. Say what the wall and radiator are like, and questions for the installer about the fixings can be written.

Hanging a heavy radiator on an old wall in a Highgate house

Heavy radiator questions in different Highgate homes

Highgate houses with lath and plaster walls

Fixings must find the studs. Ask how they will be located.

Highgate houses with solid brick walls

Fixings are strong but dusty to drill. Ask about dust control.

Highgate houses with cast iron radiators

The weight is large. Ask for feet and brackets together.

SettingParking and van accessProperty accessTypical enquiries
Highgate houses with lath and plaster wallsRoadsideDrawing roomLath walls
Highgate houses with solid brick wallsDrives commonStudyBrick walls
Highgate houses with cast iron radiatorsPermit zonesHallCast iron

Show the installer the wall, the radiator and the floor beneath, and tell them if the radiator is an antique that must not be damaged.

A household in a large house is fitting a restored cast iron radiator in a drawing room. The installer taps the wall and finds lath and plaster over studs, finds the studs with a detector and plans brackets screwed into them, plus feet to carry most of the weight on the floor. He explains the radiator’s weight when full and fits the brackets with long screws. He tests the fixings by hanging a load before filling, then fills, bleeds and checks that nothing moves over an hour. He makes good the pipe holes and levels the radiator. The household keeps the bracket details and the weight figure. A month after the visit the household checks the brackets and the plaster round them, and finds nothing moved. They note the date, the weight figure and the installer’s name on a card kept in the airing cupboard. When a decorator later asks to move the radiator, the card shows what it weighs and how it is fixed, and the work is done with care.

Heavy fixings are best done in dry autumn weather, with a long run to let the plaster and paint settle before winter.

Good to know in Highgate

Lath and plaster

An old wall construction of thin timber strips covered with plaster.

Stud

A vertical timber in a stud wall to which fixings can be screwed.

Level

Set so that a surface is exactly horizontal.

Questions about radiator installation & repairs in Highgate

01In Highgate, how heavy is a cast iron radiator?

Over a hundred kilograms when full, for a large one.

02In Highgate, how are fixings made safe?

By screwing into studs or solid brick and using feet.

03In Highgate, will the wall be damaged?

Pipe holes need making good.

04In Highgate, how is it tested for radiator repairs?

By hanging it full for an hour.

05In Highgate, what if a gas smell appears during radiator repairs?

Leave the Highgate building at once, before any radiator repairs step in Highgate, ring 0800 111 999, while Highgate switches and flames stay unused.

Talk to Heat Go

Ask about radiator installation & repairs in Highgate.

Describe the wall and the radiator to Heat Go and a list of fixing queries for the installer will follow for your Highgate house.

The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.

Radiator installation & repairs enquiry

What can we help with?

All fields marked * are required

We reply to the contact details you give. A UK number such as 07700 900123 works fine.