Highgate houses where the meter faces the front and the kitchen lies at the back
For gas appliance installation in Highgate, the run is long. Ask for the size of the pipe to be checked.
Gas appliance installation · Highgate
A kitchen moved to a lower-ground floor needs a gas supply from the meter, which may be several rooms away. The pipe must run through walls and floors, past joists and services, and be protected where it passes through. A route planned on paper before the kitchen is fitted avoids rework. Households in Highgate with a basement kitchen can ask for a route drawing.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Larger houses in Highgate often have a lower-ground floor with high ceilings and thick walls. The meter may be at the front, in a pit or a cupboard, and the kitchen may be at the back. Floors may be solid, suspended or a mix, and existing pipes and cables share the same routes.
There are five parts to the plan. The size of the pipe, chosen from the appliance’s needs and the length of the run. The route, drawn on a sketch, showing walls, floors and any sleeves where the pipe passes through. The method of passing through a floor or wall, with a sleeve to protect the pipe and allow movement. The position of the isolation valve, which must be reachable. And a pressure test, with the result noted, once the pipe is in. Ask the installer to explain the route and to mark it on a sketch. A gas pipe buried in plaster or screed needs special care and should be noted in the records.
Heat Go can help you map the route. Describe the house and where the meter and kitchen sit, and Heat Go can sketch the route with questions for the installer.
For gas appliance installation in Highgate, the run is long. Ask for the size of the pipe to be checked.
Passing through takes care. Ask how the opening will be formed and sleeved.
The route may cross shared space. Ask who agrees and who owns the walls.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Highgate houses where the meter faces the front and the kitchen lies at the back | Roadside | Basement | Long runs |
| Highgate houses with solid floors between levels | Drives common | Hallway | Solid floors |
| Highgate: conversions with a shared hall | Permit zones | Shared hall | Shared routes |
Show the installer the meter, the kitchen position and the route of any existing pipes. Share any plans from the kitchen designer.
A household in a large Victorian house plans a new kitchen in the lower-ground floor. The installer draws a route from the meter along a corridor ceiling and down through a wall to the cooker position. He marks the sleeves where the pipe passes through two walls. A pressure test is done and noted, and the kitchen fitter is told where the pipe runs, so that no screw goes into it. The household keeps the sketch, and a later builder reads it before drilling. The kitchen designer is given a copy of the sketch, and the electrician and the joiner are told where the pipe runs before they start. Nobody drills near the marked line, and the final test is noted a second time after the units are fitted, so that the household has a record from both stages of the work.
Gas routes are best settled before the kitchen is fitted, ideally in spring or summer when building work is under way. Once the units are in, moving a pipe means taking them out. In winter, any delay leaves the household without a working kitchen for longer.
A short length of tube that lets a pipe cross a wall or floor and protects it on the way.
A test that checks a new gas pipe is sound by holding it under pressure for a set time.
A tap on a gas pipe that shuts off the supply to one appliance.
It avoids rework and protects the pipe.
Only with care, and it should be noted in the records.
A tube that shields a pipe where it crosses a wall.
A check that the new pipe is sound.
Safety first: ring 0800 111 999; Highgate gas appliance installation must wait, and Highgate gas appliance installation may resume later.
Gas emergency
If you suspect a gas leak, call the National Gas Emergency Service immediately on 0800 111 999. The enquiry form below is for non-emergency questions.
Talk to Heat Go
A route sketch for the installer can be drafted by Heat Go from the position of the meter and kitchen in your Highgate house.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All gas servicesEvery service in HighgateAll gas appliance installation areas